making a small scalloped coaster

Whilst digitising the Morning Grunge collection I had noticed that with some editing the wings of the hummingbird would make a lovely scalloped edge. For the third set which has been created for 6″ wide hoops,  I have used this edge to create a round scalloped edge coaster with just morning glory buds inside….

all-done

Needing a coaster for one of my bedroom the colours needed to be changed to compliment those in the room. I replaced Sulky Rayon 40wt 1022 Cream with 1204 Pastel Jade and 1151 Powder blue tint with  1205 Medium jade, along with 1508 Putty instead of 650 Moss green for the stems.2017-02-28_13-53-18In deciding which of these to use I opted for the lighter shade for the main scallops and the slightly darker shade for the small scrolls as these cover a smaller portion of the mat.2017-02-28_13-54-31

Obviously for scallop work you need to think out how you are going to do this. The first colour way stitches out the underlay of the scallops so you need to carefully cut around the outside of these, leaving your stabiliser underneath in place to support the embroidery. Don’t rush this process and be sure to use the sharpest of scissors for the best results.

file-28-02-2017-16-04-15

Then the satin stitches are added neatening the edges.

file-28-02-2017-16-06-21

Although daunting the first time you do this, the results are incredibly satisfying! 

file-28-02-2017-16-08-12

Any tail ends that protrude from the satin stitches can be trimmed away afterwards by using tweezers and sharp scissors, under a lighted magnifier.

file-28-02-2017-16-11-51

Once the embroidery is completed the stabiliser it is best if the stabiliser can be washed away giving a better edge than tearing or trimming it away.

file-28-02-2017-16-19-39

Obviously if you embroider on silk this is not possible, and a heat away stabiliser should be used.

file-28-02-2017-16-20-24

For my stitch out I used cotton fabric as I wanted the finished coaster to be washable. I used Floriani wet and gone stabiliser. 

file-28-02-2017-16-21-16

 There will be a larger oval coaster to match this one,  in the fourth set for 12″ x 8″ hoops. Here are a few other designs in this set, a quilt block.

gfe-mgg-3-5

This is a vertical panel which I felt was necessary for those of you who will make a Morning Grunge quilt!

gfe-mgg-3-9

This is one of my favourite designs in the set, as I had such fun arranging the shell like scallops! It has great possibilities and I will introduce these elements again in the final set of designsgfe-mgg-3-11_

Happy embroidering from Hazel

This entry was posted in Discussing machine embroidery and tagged , , . Bookmark the permalink.

2 Responses to making a small scalloped coaster

  1. Elaine Plant says:

    I think the free set for the birthday celebration should be call Birthday blooms and and more.
    Thanks Elaine

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s